Name: China Conventional Turning Lathe Manufacturers Suppliers Factory - Anyang Machine Tools
Brand: Anyang XS
SKU: 301733155

Conventional turning lathe

Conventional turning lathes are specifically designed for small workpieces that require ultra-high precision. With spindle run-out within 50 millionths of an inch, these manual lathes provide exceptional accuracy, making them ideal for intricate machining tasks.

	All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining. High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions. Wide range of feeds and threads. Selection done by "pull and lock" handles to avoid slipping in engagement of gears. Jog button is equipped at headstock for easy engagement of gears before cutting.
	One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways. The carriage and cross slide ways are lubricated by push button knobs. The removable gap increases the swing by an extra 8" to accommodate larger work pieces that are short in length 5 position carriage stop for pre-positioning of carriage feed distance. "Tang" in tail stock for easy "knock out" of centers stuck in tailstock
	Special package is available that includes 2 axis Digital Readout System, Chuck guard with limit switch, Steady rest, Follow rest and Work light

Parameter of Conventional turning lathe

Specification	Unit	CW6163B	CW6180B	CW6194B
Max. swing over bed	mm	630	800	940
Max. swing over cross slide	mm	350	520	660
Distance between centers	mm	750/ 1000/ 1500/ 2000/ 3000/ 4000/ 5000/ 6000/ 8000/ 10000/-
Max. turning length	mm	600/ 850/ 1350/ 1850/ 2850/ 3850/ 4850/5 850/ 7850/ 9850/-
Max. swing over gap (optional)	mm	830	1000	1140
Gap length (optional)	mm	300	300	300
Bed width	mm	550	550	550
Loading capacity	kg	2000	2000	2000
Spindle nose	-	C11	C11	C11
Spindle bore	mm	100	100	100
Spindle taper	-	Metric 120	Metric 120	Metric 120
Spindle speed range	rpm	7.5-1000	6-800	6-800
Spindle speed step	steps	18	18	18
Longitudinal feed range	mm/r	0.1-24.32 (64)	0.1-24.32 (64)	0.1-24.32 (64)
Cross feed range	mm/r	0.05-12.16 (64)	0.05-12.16 (64)	0.05-12.16 (64)
Leadscrew pitch	mm	12	12	12
Metric threads range (kinds)	mm	1-240 (50)	1-240 (50)	1-240 (50)
Inch threads range (kinds)	TPI	14-1 (26)	14-1 (26)	14-1 (26)
Module threads range (kinds)	mm	0.5-120 (53)	0.5-120 (53)	0.5-120 (53)
Diametrical threads range (kinds)	DP	28-1 (24)	28-1 (24)	28-1 (24)
Rapid feed speed	mm/min	4000	4000	4000
Cross slide travel	mm	440	540	570
Top slide travel	mm	200	200	200
Tool section size	mm	32x32	32x32	32x32
Tailstock quill diameter	mm	100	100	100
Tailstock quill travel	mm	250	250	250
Tailstock quill taper	-	MT5	MT5	MT5
Main motor power	kw	11	11	11
Machine length	mm	2958/ 3275/ 3725/ 4225/ 5225/ 6275/ 7355/ 8355/ 10275/ 12275/-
Machine width	mm	1393	1473	1430
Machine height	mm	1537	1622	1690