Knowledge

What do I need to pay attention to when using a CNC lathe?

Apr 18, 2025 Leave a message

When using CNC machine tools, you need to pay attention to the following aspects to ensure operational safety, processing quality and normal operation of the machine:

 

Contact now

 

Before operation

 

  1. Wear personal protective equipment: Before operation, staff should do a good job of safety protection, such as work clothes, safety shoes, safety glasses, earplugs, etc., to avoid clothing involved in the machine tool. Long hair need to wear a hat or hairnet, it is strictly prohibited to wear gloves to operate the machine tool.
  2. Check the status of the machine tool: make sure that all parts of the machine tool are intact, the lubrication system is normal, and the power connection line, control line and power supply are stable.
  3. Familiarise yourself with the programming software: make sure that the programming is error-free and run the program under the simulation environment to check whether there are any problems such as collision and overtravel.

 

Operation process

 

  1. Workpiece clamping: Make sure the workpiece is firmly clamped to avoid dislodging or shifting during machining. According to the material and shape of the workpiece to choose the appropriate fixture and clamping method.
  2. Tool selection and installation: the tool used should be in line with the specifications permitted by the machine tool, carry out trial cutting after installation to ensure that there is no error before formal machining.
  3. Parameter setting: According to the workpiece material, tool type and processing requirements, set cutting speed, feed and other parameters reasonably.
  4. Machining process monitoring: pay close attention to the running status of the machine tool and adjust the parameters in time to ensure the machining quality. It is forbidden to touch the tool tip and iron chips by hand, and the iron chips need to be cleaned by iron hook or brush.

 

After Operation

 

  1. Cleaning machine tools: Remove swarf and wipe the machine to maintain a clean condition.
  2. Inspection and Replacement: Check whether the oil rubbing plate on the guideway of the machine tool is worn out, and replace it if necessary. Regularly check the status of lubricating oil and coolant and add or replace them in time.
  3. Power off and protection: Switch off the power supply and the general power supply on the operation panel of the machine tool in turn, and the machine tool which is not used for a long time should be protected.

 

Other Precautions

 

  1. Prohibit unauthorised parameter changes: Except for the parameters that can be changed by the user, other system parameters, spindle parameters, etc. cannot be modified by the user privately.
  2. Comply with the shift handover system: Ensure that the status of the machine is accurately recorded and passed on to the next shift operator.

 

product-750-1058

 

Send Inquiry